9 Helpful Mig Welding Tips for Brand-New Welders from Pros

Useful Mig welding tips and hints that new welders should take note of...

Pocket tips and hints help out a lot along the process welders do their welds. Both managers and welders expect a quality welds approved by inspectors and without any customer complaints. That’s why helpful tips collection is often highly appreciated. It will be more appreciated if they are from the experienced, skilled and successful persons. Below are some useful Mig welding tips from pros that newbies can get to enrich their welding knowledge and hone their skills.

Try to become a successful welder by persistently learning skills, pocketing tips and working hard.

Mig welding (also, Metal Inert Gas Welding) is considered a welding technique that the filler metal is a supplier of power current and maintains arc. Thanks to inner gas – commonly, Argon, the arc would be shielded from air access. This process would combine two pieces of metal using a consumable wire with an electrode current connected.

1. Keep 1/4” – 3/8 in stick-out all the times. The stick-out acts as the electrode extending from the tip off your contact tube.

2. For thin metal, always apply a smaller diameter. You can employ a larger machine and a larger wire for thicker metals.

3. Always employ an appropriate shielding gas. CO2 commonly makes a good penetration into steel welds. Still, for thin metals, it can be too hot.

4. Only have Argon in use when you work with aluminium.

5. There are 2 typical types of wire when welding on steel. When working with dirty or rusty steel, use the ER70S wire.

6. Most control the weld bead. Always direct the wire toward the weld pool’s leading edge.

7. Always try to point the gun possibly straightest whilst you are welding.

8. If possible, you should weld using both hands, which will enable you to work with the guns kept steady.

9. Always keep your wire dry and clean to avoid any contaminants that can worsen your welds.